Electrical Utility Solutions

RTS designs and fabricates solutions for electrical transmission and distribution utility systems. As an ISO 9001:2015 certified supplier, RTS fulfills customer requirements and specification compliance with a high level of quality for all the engineered-to-order products we build.

RTS’s modular protection control and telecommunication (PCT) substations or E-Houses are custom built to your requirements, pre-tested, for all levels of electrical power transmission, distribution and generation. Whether for electrical utilities, renewable installations, industrial sites or the transport sector, we deliver.

RTS designs and manufactures PCT panels for a large range of applications, including:

  • Substation automation equipment
  • Metering & fault recording
  • Transformer Automatic Voltage Control (AVC) systems
  • Generator, transformer, feeder, busbar and mesh corner protection
  • Digital control systems
  • Substation control panels and mimic control boards
Control protection panel

Our PCT panels house various equipment, including:

  • Protection & Control IEDs
  • Meters and Fault Recorders
  • Control Switches & Mimic Panels
  • Network Switches & GPS Clocks
  • PLC Equipment
  • Industrial Computers & HMI Monitors

 

RTS can work with you on your panel fabrication requirements, in whatever context you see fit:

  • Fabricating Custom Panels/Racks
  • Procurement of Electrical Components & IEDs
  • Mounting and Installation of Electrical Equipment
  • Quality Assurance Checks (Buzz Tests, etc.)
  • Panel FAT/SAT
  • Installation of Panels and Inter-Panel Cabling

Various Panels Built

Automatic Voltage Control (AVC/RTCC)

Automatic voltage control monitors the voltage of a power transformer and keeps the load voltage in the controlled setting value. This control is performed using a control IED which sends control output to a tap-changer for the transformer. A signal can be sent to raise or lower the tap, depending on the voltage setting.

Annunciator & Marshalling Kiosk Panel

These panels are used to display substation signals and provide continuous signal recording and printing.

Automatic Capacitor Control System (ACCS)

The automatic capacitor control system (ACCS) provides automatic control for capacitor banks to improve the power factor and reduce the volt-ampere reactive (VAR) value in the network, thereby helping to reduce losses in power lines, the control logic performed by gathering voltage, current, and breaker status of the busbar and the incomers. This control can be achieved through an IED which can calculate the VAR values and drive a logic based on these values.

Mosaic Control Panel

This device is used to control switching equipment and the measurement of energy in all bays. The control and indicator arrangement are constructed of mosaic tiles on the front side of the panel. The use of tiles allows for easy modification and bay extension for future expansion.

Interposing Relay Panels (IRP)

An interposing relay panel is used to send signals and status between the control centre and electrical components such as motor control centers, motors, pumps, lighting, and so on.

Data Retrieval / Station Evaluation Panel (DTR/SEP)

The DTR/SEP Panels relay in all panels to ensure seamless communication through one system. It is used to download and upload data from remote area protection and management equipment at a master station headquarters.

Metering Panels

These panels are used to measure energy for tariffs.

Protection Relay Panels

Automatic Capacitor Control System (ACCS)
The automatic capacitor control system (ACCS) provides automatic control for capacitor banks to improve the power factor and reduce the volt-ampere reactive (VAR) value in the network, thereby helping to reduce losses in power lines, the control logic performed by gathering voltage, current, and breaker status of the busbar and the incomers. This control can be achieved through an IED which can calculate the VAR values and drive a logic based on these values.

Automatic Voltage Control (AVC/RTCC)
Automatic voltage control monitors the voltage of a power transformer and keeps the load voltage in the controlled setting value. This control is performed using a control IED which sends control output to a tap-changer for the transformer. A signal can be sent to raise or lower the tap, depending on the voltage setting.

Annunciator & Marshalling Kiosk Panel
These panels are used to display substation signals and provide continuous signal recording and printing.

Mosaic Control Panel
This device is used to control switching equipment and the measurement of energy in all bays. The control and indicator arrangement are constructed of mosaic tiles on the front side of the panel. The use of tiles allows for easy modification and bay extension for future expansion.

Interposing Relay Panels (IRP)
An interposing relay panel is used to send signals and status between the control centre and electrical
components such as motor control centers, motors, pumps, lighting, and so on.

Data Retrieval / Station Evaluation Panel (DTR/SEP)
The DTR/SEP Panels relay in all panels to ensure seamless communication through one system. It is used to download and upload data from remote area protection and management equipment at a master station headquarters.

Metering Panels
These panels are used to measure energy for tariffs.

Line Feeder Protection Panels
  • Distance protection
  • Line differential protection
  • Directional overcurrent protection
  • Breaker Failure Protection
  • Auto re-close & synchronizing check scheme

Transformer Protection Panels
  • Differential Protection Panels
  • REF protection (Residual Earth Fault)
  • SEF protection (Sensitive Earth Fault)
  • Over-current protection
  • Breaker failure protection
Control panel

Our Portfolio

E-Houses and PCT Boxes

E-Houses and PCT Boxes

ADS

Hydro One ADS (GE)

K-Line International E-Housenternational E-House

K-Line International E-House

Yukon Energy E-House

Yukon Energy E-House

Our Vendors

As an independent protection and control specialist, RTS can deliver engineered solutions and products using equipment from all the major manufacturers.

Quality Standards

ISO Certified Company Logo

All RTS products are manufactured and tested in compliance with CSA/UL and ISO 9001:2015 standards.

UL & CSA Certified

With customer satisfaction as our top priority, along with stringent quality manufacturing processes in place at every level of production, RTS products are compliant with the industry’s statutory and regulatory requirements.

500+ Customers Worlwide

Request a consultation

contact us